Forklift Operator

A.        Check Forklift for Safe Operation

            1.  Brakes

            2.  Steering

            3.  Oil

            4.  Battery

            5.  Tires

            6.  Flashing Light

            7.  Water

            8.  Horn

B.        Operating Checklist

            1.  Operate forklift in warehouse to see that it will operate safely.

            2.  If any adjustments are needed, contact Shipping Foreman for a mechanic to be called out.

            3.  Check the forward and reverse motion of forklift truck.

            4.  Check prongs, hoist and tilt for proper operation.

            5.  Complete Daily Forklift Inspection Form (required).

C.        We have four different kinds of work for forklift truck operators:

            1.  Boxcar and Trailer Loading

                        A.        Check with Shipping Clerk as to which boxcar or trailer is to be loaded and place ramp in car/trailer.

                        B.        Check out the ramp and car/trailer for safe condition.

                        C.        Check with Shipping Clerk for the rubber to be loaded and what pattern to use in loading car/trailer.

                        D.        Load the rubber on the car/trailer.

                        E.         Remove ramps from car/trailer.

                        F.         Cross-haul units between buildings, if needed.

                        G.         Unload trailers of packaging supplies and drummed or dry chemicals.

                        H.        Deliver packaging supplies and drummed or dry chemical, as needed.

                        I.          Operate track mobile, as required.

            2.  Production Pulling

                        A.        Ensure all R.A.C.s being brought into building to be loaded are in good condition.  If not, they are to be rejected.

                        B.        Units of rubber will not be moved from production line until they are properly ticketed.

                        C.        Different types of rubber are placed in the warehouse in their appropriate areas.

                        D.         Write weight and date on each skid (when printer is out of order).

                        E.         Check scales once per shift with two 1,000# weights with the cable sling off.  Scales must be within plus or minus two pounds.  If not, report this to the Production Foreman immediately.

                        F.         Haul “HOG” rubber to the hogging area, if needed.

            3. Outside Forklift Operator  

                        A.        Supply Process #2 and #3 with prepped R.A.C.s.

                         B.       Relieve production puller and self for breaks.

                        C.        Unload railcars and trailers, as needed.

                        D.        Load/unload damaged R.A.C.s to be sent out to vendor for repairs.

                        E.        Unload any after hour deliveries of packaging or chemicals, as required.

                        F.         Keep dumpsters empty and available at all times.

                        G.        Weigh and ticket all units of P.C.M.  These units are to be carried to Process #1 and placed in designated area for wet or dry only.

                        H.        Operate track mobile, as required.

A.        Use caution at all times when operating forklift trucks.

B.        Stop at all blind corners and sound horn.

C.        Check for pedestrians in areas where working.

D.        Keep forklift under control at all times.

E.        Always wear eye protection in the Plant.

High school diploma or GED equivalent

Good communication skills, ability to handle multiple assignments

Experience in a manufacturing/industrial setting or warehouse a plus

Ability to work 12-hour rotating shift with overtime

Requires a high school degree

A.        90% of the time spent driving forklift, 10% of time spent on checking railcars and on breaks.

B.        Some pulling on railcar doors and walking on uneven ground to check railcars (proper shoes required).

C.        Must have normal vision and hearing.

D.        Some exposure to engine fumes and dust in the warehouses.

E.          Must be able to read and write.

F.         Some climbing experienced on ladders; on docks and on/off of forklift.

1.         Safety glasses must be worn at all times in the Plant.

2.         No running in the Plant.

3.         Check each blind corner before walking out into an aisle or onto loading dock.

4.         No unauthorized persons (person not working in the area) allowed in the warehouses or on the loading dock.

5.         Forklift operating (see checklist):

            A.        Read your operating manual for forklift operation.

            B.        Before operating - check horn, brakes, steering and flashing light.

            C.        Slow down at blind corners and aisles, blow your horn.

            D.        When carrying a load that blocks your view, operator must travel in reverse.

            E.         When two crews are working in the same warehouse, plan the work so that each forklift will use different doorways while loading.

            F.         Forklift drivers watch for pedestrians and fellow workers when traveling.

6.         Ensure mirrors on all docks and other work areas are kept clean and adjusted for best usage.

7.         Read your job safety reviews once every six months to ensure that you know how to perform each job safely.

Computer Based Learning (CBL’s), also off site training is provided when needed depending on job position and requirements.

Certain roles at Firestone Polymers are required to be on Emergency Response Teams (ERT) to respond to any emergencies that could come up at the site.  Being on the ERT team requires passing a physical and additional trainings, including exterior firefighting, high-angle rescue, HazMat response, etc.  The role you’re applying for could require ERT training.  It’s also possible that ERT training will be required when moving into new roles or transferring departments.

If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.