Antenna Design Engineer II

Us-Tx-Mckinney-513wd ~ 2501 W University Dr ~ Wing D Bldgmid

OtherAntenna Design Engineer

3 views0 saves0 applied

Apply Now

Quick Summary

Requirements Summary

The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S.

Technical Tools

OtherAntenna Design Engineer

2026-09-03

United States of America

US-TX-MCKINNEY-513WD ~ 2501 W University Dr ~ WING D BLDG

Onsite

Requirements

~1 min read

The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) and minimum of two (2) years of relevant RF engineering experience including any combination of the following:
- Design, fabrication, or testing of antennas, apertures, and passive RF components such as radiating elements, radomes, power dividers, couplers, RF transitions, multilayer boards, or Frequency Selective Surfaces (FSS).
- Experience designing and testing ultra wideband phased array antennas such as Tightly Coupled Dipole Arrays (TCDA), Vivaldi, Sliced Notch, or Planar Ultra Wideband Modular Arrays (PUMA).
- Experience with EM modeling tools such as HFSS, CST, FEKO, or SENTRi.

Master’s or PhD in Electrical Engineering with a concentration in RF/Microwave circuits.
3.5+ cumulative GPA.
Electromagnetic modeling, simulation and test experience with phased array antennas or wideband antennas.
Knowledge of printed wiring board (PWB) or printed circuit board (PCB) fabrication processes, stack‑up design, and design rules.
Strong written and verbal communication skills supported by publications, technical presentations, or student awards.
Ability to troubleshoot complex antenna or RF performance issues and collaborate across multidisciplinary teams.
Experience supporting prototype builds, test automation, fixture design, or specialized antenna range measurements.

DoD Clearance: Secret

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

Our Airborne Antennas, Radome & Apertures team is recognized across the defense community as one of the most capable antenna and low observable (LO) engineering groups in the United States. Our engineers tackle some of the world’s toughest RF, antenna, and aperture challenges. We design high performance, highly integrated, mission critical antennas, radomes, and active electronically scanned arrays (AESAs).

We are seeking an Antenna Design Engineer II to support the development of advanced antennas and ultra‑wideband phased arrays. This role is ideal for new M.S. EE graduates who want to work on programs of national importance and who excel in both deep technical analysis and hands‑on engineering.

This position requires job duties to be performed onsite due to the sensitive nature of this work and the desire for in-person collaboration; however, we offer flexible in-office hours and the ability to perform some job duties remotely.

Responsibilities

~1 min read

→Provide technical solutions to a wide range of challenging problems involving antenna and AESA based applications such as radar, electronic warfare, communications, and direction finding.
→Use advanced computational electromagnetic (CEM) software (HFSS, CST, FEKO, SENTRi) to design, model, and predict performance of antennas and apertures including spiral, sinuous, Vivaldi, patch, slot, horn, and ultra‑wideband tightly coupled dipole arrays (TCDA).
→Create, refine, and optimize antenna designs using full‑wave solvers, run parametric studies, and balance electrical, mechanical, LO, and environmental constraints.
→Perform EM simulation and/or test to verify compliance with antenna‑level and system‑level requirements, performing root‑cause investigations when issues arise.
→Participate in testing of RF hardware for key performance metrics such as VSWR, insertion loss, gain, efficiency, polarization, and radar cross section (RCS).
→Support antenna prototyping, build reviews, troubleshooting, and integration activities in collaboration with Operations, Manufacturing, and Test Engineering.
→Contribute to internal and customer‑funded research and development programs involving antenna, phased‑array, or RF component/system design.
→Document technical approaches, design decisions, and verification results in engineering reports and formal design reviews.
→Travel Requirements: Less than 10% annually.

What We Offer

~1 min read

✓Work on antennas that go onto real platforms and deliver real‑world mission impact.

✓Access to one of the broadest ranges of antenna technologies in industry (AESA, UWB, LO, conformal, EW, comms, radar, sensing).

✓Deep technical career growth supported by nationally recognized experts.

✓Collaborative environment with multidisciplinary engineering excellence.

This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.

Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.

Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.

This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.

RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Click on this link to read the Policy and Terms