Certified Welding Inspector

• →Perform visual and dimensional inspection of structural steel weldments, skid frames, equipment supports, E-house structural members, lifting lugs, platforms, stairs, handrails, and related fabricated assemblies.
• →Inspect fit-up, joint preparation, weld quality, weld profiles, weld sizes, discontinuities, and completed weldments in accordance with AWS D1.1, approved drawings, weld procedures, and project specifications.
• →Verify welding is performed to approved WPSs and that welders are qualified for the applicable welding process, position, material, thickness range, and joint type.
• →Review and maintain welder qualification records, WPSs, PQRs, continuity logs, weld maps, inspection reports, and other quality records.
• →Conduct pre-weld, in-process, and final inspections, including verification of material identification, traceability, joint fit-up, preheat/interpass temperatures, consumable control, and post-weld requirements.
• →Identify nonconforming welds or fabrication conditions; document deficiencies through NCRs or internal quality processes; coordinate corrective actions and verify repairs.
• →Coordinate and review nondestructive examination (NDE), including MT, PT, UT, or RT, when required by contract documents or project specifications.
• →Verify repair welding is completed in accordance with approved procedures and reinspect repaired areas.
• →Perform dimensional checks to confirm fabricated skids and E-house structural assemblies meet drawings, tolerances, plumbness, squareness, and interface requirements.
• →Support inspection hold points, customer witness points, third-party inspections, and final turnover documentation.
• →Communicate inspection findings clearly to welders, supervisors, engineering, project management, and customers while maintaining an objective, production-supportive approach.
• →Participate in root-cause analysis and continuous-improvement initiatives related to weld quality, rework, fabrication efficiency, and safety.
• →Maintain inspection tools, gauges, temperature-measuring equipment, and calibration records.
• →Follow all company safety policies, quality procedures, and applicable customer requirements.

• →Flexible and adaptable team player who operates with agility and resourcefulness and thrives in an often-changing environment. You will be operating with a start-up mindset and must be willing to help wherever needed - "not my job" is an unacceptable response.

• Current AWS Certified Welding Inspector (CWI) certification.
• Working knowledge of AWS D1.1 Structural Welding Code—Steel.
• Minimum 3–5 years of welding inspection experience in structural steel, industrial fabrication, modular skids, process equipment, or similar heavy fabrication.
• Experience inspecting GMAW, FCAW, SMAW, and/or GTAW welding processes.
• Ability to read and interpret fabrication drawings, welding symbols, P&IDs, general arrangement drawings, weld maps, bills of material, and project specifications.
• Knowledge of weld discontinuities, acceptance criteria, weld repair methods, and visual inspection techniques.
• Familiarity with welder qualification requirements, WPS/PQR documentation, material traceability, and quality-record control.
• Ability to use standard inspection tools, including weld gauges, fillet gauges, calipers, tape measures, levels, squares, and temperature-indicating devices.
• Strong written documentation, communication, and organizational skills.
• Proficiency with Microsoft Office and electronic quality-documentation systems.

• AWS Senior Certified Welding Inspector (SCWI), Certified Welding Educator (CWE), or NDE certification.
• Experience with AWS D1.5, ASME Section IX, or customer-specific welding requirements.
• Experience in fabrication of industrial skids, electrical houses, switchgear enclosures, modular process systems, pipe racks, or structural steel packages.
• Familiarity with ISO 9001 quality-management systems.
• Experience working with customer inspectors, third-party inspectors, and EPC project documentation requirements.
• Knowledge of coating inspection, including surface preparation and paint/coating hold points.

• Ability to work in a manufacturing and fabrication environment, including exposure to noise, welding fumes, heat, dust, and changing weather conditions.
• Ability to walk fabrication areas, climb stairs and ladders, access elevated work areas, and inspect large assemblies.
• Ability to lift and carry inspection tools and equipment up to [30–50] pounds.
• Ability to use appropriate personal protective equipment, including safety glasses, steel-toe footwear, hearing protection, hard hat, gloves, and fall-protection equipment when required.

Beware of recruiting scams. IEM never charges candidates fees, and all recruiter emails come from an @iemfg.com address. If you suspect fraudulent activity, do not share personal information and report it to us at iemfg.com/contact

IEM does not discriminate against any applicant based on any characteristic protected by law.

Information collected and processed as part of your IEM Careers profile, and any job applications you choose to submit is subject to IEM's Workforce Member Privacy Policy.

At IEM, we are committed to a fair and transparent hiring process. Use the link below to view how we use artificial intelligence (AI) technology to assist in reviewing job applications and your rights as an applicant.

AI Use in IEM's Hiring Process