Electrical QA/QC Inspector

• →Perform daily inspections for electrical installations, including conduit, cable tray, wire pulls, terminations, grounding/bonding, equipment installation, lighting, PDUs, panels, switchgear, and MCCs.
• →Verify compliance with NEC 2017, IBC/IFC, IMC/IPC (as applicable), ASHRAE, TSMC standards, and local amendments.
• →Confirm conductor types, sizes, tags, routing, and proper labeling are installed per drawings and project specifications.
• →Inspect grounding/bonding systems per NEC Article 250 and project requirements.
• →Inspect medium-voltage and low-voltage systems for correct installation practices.
• →Review torque logs, insulation resistance tests, megger results, and equipment functional tests.

• Inspect and verify low-voltage installations such as:
• Data, telecom, fiber optics
• Access control
• Security systems
• Paging and mass notification
• Review cable routes, separation requirements, and labeling per project drawings and standards.
• Inspect cable testing results (OTDR, continuity, performance testing).
  
  

• Prepare daily inspection reports with photos, comments, and status details.
• Issue Non-Conformance Reports (NCRs) and track corrective actions.
• Maintain up-to-date logs for inspections, deficiencies, re-inspections, and turnover packages.
• Review contractor QAQC documentation, including checklists, test reports, as-built drawings, redlines, and equipment submittals.
• Support creation and maintenance of Quality Turnover Packages (QTPs).
  
  

• Work closely with field crews, superintendents, subcontractors, and engineers.
• Coordinate inspections with City of Phoenix inspectors and third-party special inspectors.
• Attend daily coordination meetings and integrate QAQC updates into trackers.
• Support commissioning teams for electrical, fire alarm, and low-voltage systems.

• Enforce electrical safety requirements (LOTO, arc flash, PPE, energized work rules).
• Identify and report unsafe practices or conditions.
• Ensure all work complies with TSMC safety policies and industrial cleanroom standards.
  
  

• Minimum 3–5 years of experience as an Electrical QAQC Inspector, Electrician, or Electrical Field Engineer.
• Experience on large industrial, semiconductor, pharmaceutical, or mission-critical projects preferred.
• Experience with fire alarm and low-voltage systems required
• Strong understanding of NEC, NFPA 72, NFPA 70, IPC/IMC, and related codes.
• Prior experience working with City of Phoenix or similar AHJ is a plus.
  
  

• Ability to read and interpret construction drawings, one-lines, riser diagrams, and specifications.
• Familiar with Smartsheet, BIM 360 / ACC, Bluebeam, Procore, Smartsheet, Viewpoint, or similar platforms.
• Knowledge of commissioning processes (FAT/SAT, integrated systems testing).
• Strong documentation, photo capture, and reporting skills.

• Ability to walk large industrial sites daily.
• Ability to climb ladders, access elevated work areas, and navigate construction zones.
• Ability to lift up to 40 lbs. occasionally.
  
  

• Strong attention to detail.
• Clear and concise communication.
• Problem-solving mindset with the ability to identify root causes.
• Ability to work independently and in coordination with teams.
• High level of professionalism representing the GC to owner and inspectors.
  
  

• Ability to work in cleanroom or sub-fab environments.
• Willingness to work extended hours or weekends when required for testing or inspections.
• Must pass background checks, safety orientations, and site-specific training.
• Must comply with confidentiality and photography restrictions on the semiconductor site

• Excellent verbal and written communication skills in English.

• Must have and maintain a valid Arizona driver’s license. May be required to travel to other sites within Arizona to perform certain work functions.

The physical demands described here are representative of those that a candidate must meet to successfully perform the essential functions of this job.

• Frequently stand and walk for extended periods throughout the workday.
• Frequently lift, carry, push, and pull materials weighing up to 50 pounds, and occasionally lift heavier items with assistance or mechanical equipment.
• Bend, stoop, kneel, crouch, and reach to perform assigned tasks.
• Use hands and fingers to handle, feel, grasp, and operate tools, equipment, or materials.
• Perform repetitive motions involving the hands, wrists, and arms.
• Climb ladders, stairs, or elevated surfaces as required by the job.
• Maintain visual acuity sufficient to read labels, instructions, safety signage, and documentation.
• Maintain balance and coordination while moving materials or operating equipment.
• Ability to work in physically demanding environments requiring frequent movement and manual labor.

• Exposure to dust, noise, vibration, and moving mechanical equipment.
• Indoor and/or outdoor work environments, which may include varying temperatures and weather conditions.
• Work in confined spaces, elevated areas, or active job sites, depending on project requirements.
• Required use of personal protective equipment (PPE) such as hard hats, safety glasses, gloves, steel-toe boots, and high-visibility vests.
• Interaction with powered industrial equipment, tools, and vehicles.

The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties as assigned by their supervisor.