Quick Summary
Key Responsibilities
Fabricate, install and maintain traffic signage. Install and maintain pavement markings and permanent barricades. Prepare and maintain a variety of records, data and/or other related information.
Requirements Summary
Principles associated with traffic signs, signals and markings and thermoplastic applicator. Basic electronic principles. Safe work methods, especially when working in areas of high voltage, water,
Technical Tools
OtherTechnician
SALARY: $23.75 - $34.95, Hourly (DOE&Q) NON-EXEMPT
OPENING DATE: 08/31/2026
CLOSING DATE: 09/08/2026 by 5:00 P.M.
JOB SUMMARY
Performs work related to the installation of traffic signs; the installation, repair, and maintenance of electronically controlled traffic control devices; and the delineation of pavement markings in accordance with standards and regulations. Responds to emergency situations regarding downed traffic stop and yield signs and electronic traffic control devices.
SUPERIVISION RECEIVED AND EXERCISED
Receives supervision for the Traffic Supervisor.
EXAMPLES OF IMPORTANT RESPONSIBLITIES AND DUTIES: Essential and other important duties and responsibilities may include, but are not limited to, the following:
Fabricate, install and maintain traffic signage.
Install and maintain pavement markings and permanent barricades.
Prepare and maintain a variety of records, data and/or other related information.
Install and repair traffic signals, school zone flashers and city-owned and maintained street lighting.
Participate in training signal crew members on work procedures and practices.
Respond to emergency and on-call situations.
Trim trees that obstruct traffic control signage.
Assist with the gathering of traffic information for city asset management program.
Drive to various locations and operate large equipment in the course and scope of daily job duties.
Complete work orders and work progress reports.
Observe safety rules and regulations.
Learn and stay updated on traffic-related laws, ordinances and rules, city and departmental policies and procedures and oral and written instructions.
Perform other related duties as assigned.
QUALIFICATIONS
Knowledge of:
Principles associated with traffic signs, signals and markings and thermoplastic applicator.
Basic electronic principles.
Safe work methods, especially when working in areas of high voltage, water, gas and other dangerous utilities.
Advanced maintenance principles.
Texas Manual of Uniform Traffic Control Devices.
Applicable laws, codes, ordinances, policies, procedures and regulations.
Ability to:
Troubleshoot and resolve problems related to this role.
Perform basic mathematical calculations.
Perform manual labor.
Perform advanced maintenance and repair activities.
Apply judgment, discretion and resourcefulness in interpreting and applying guidelines.
Utilize applicable tools and equipment of the trade.
Operate computer and related software applications.
Communicate effectively with a variety of individuals, including supervisors, co-workers and the public.
Operate boom trucks, bucket trucks and other specialized equipment used to install signs, traffic signals and associated equipment.
Learn new equipment, software and methods of performing duties.
Work after business hours, including nights, weekends, holidays, and/or on-call, as needed.
Maintain effective audio-visual discrimination and perception needed for:
Maintain physical condition appropriate to the performance of assigned duties and
responsibilities which may include the following:
EXPERIENCE AND TRAINING GUIDELINES: Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way would be:
Experience:
One (1) year of increasingly responsible signs or traffic signal installation experience.
Training:
Must have completed the twelfth grade and possess a high school diploma or have a GED.
License or Certificate:
Possession of Class A or B CDL preferred.
Possession of, or ability to obtain, a Work Zone Safety Certification administered by the National Safety Council.
Possession of, or ability to obtain, an IMSA Level I Certification.
Sign & Signal Technician - Posting #26-080.
OPENING DATE: 08/31/2026
CLOSING DATE: 09/08/2026 by 5:00 P.M.
JOB SUMMARY
Performs work related to the installation of traffic signs; the installation, repair, and maintenance of electronically controlled traffic control devices; and the delineation of pavement markings in accordance with standards and regulations. Responds to emergency situations regarding downed traffic stop and yield signs and electronic traffic control devices.
SUPERIVISION RECEIVED AND EXERCISED
Receives supervision for the Traffic Supervisor.
EXAMPLES OF IMPORTANT RESPONSIBLITIES AND DUTIES: Essential and other important duties and responsibilities may include, but are not limited to, the following:
Fabricate, install and maintain traffic signage.
Install and maintain pavement markings and permanent barricades.
Prepare and maintain a variety of records, data and/or other related information.
Install and repair traffic signals, school zone flashers and city-owned and maintained street lighting.
Participate in training signal crew members on work procedures and practices.
Respond to emergency and on-call situations.
Trim trees that obstruct traffic control signage.
Assist with the gathering of traffic information for city asset management program.
Drive to various locations and operate large equipment in the course and scope of daily job duties.
Complete work orders and work progress reports.
Observe safety rules and regulations.
Learn and stay updated on traffic-related laws, ordinances and rules, city and departmental policies and procedures and oral and written instructions.
Perform other related duties as assigned.
QUALIFICATIONS
Knowledge of:
Principles associated with traffic signs, signals and markings and thermoplastic applicator.
Basic electronic principles.
Safe work methods, especially when working in areas of high voltage, water, gas and other dangerous utilities.
Advanced maintenance principles.
Texas Manual of Uniform Traffic Control Devices.
Applicable laws, codes, ordinances, policies, procedures and regulations.
Ability to:
Troubleshoot and resolve problems related to this role.
Perform basic mathematical calculations.
Perform manual labor.
Perform advanced maintenance and repair activities.
Apply judgment, discretion and resourcefulness in interpreting and applying guidelines.
Utilize applicable tools and equipment of the trade.
Operate computer and related software applications.
Communicate effectively with a variety of individuals, including supervisors, co-workers and the public.
Operate boom trucks, bucket trucks and other specialized equipment used to install signs, traffic signals and associated equipment.
Learn new equipment, software and methods of performing duties.
Work after business hours, including nights, weekends, holidays, and/or on-call, as needed.
Maintain effective audio-visual discrimination and perception needed for:
- making observations
- reading and writing
- inspecting assigned projects
- operating assigned equipment
- communicating with others.
- making sound decisions
- demonstrating intellectual capabilities.
Maintain physical condition appropriate to the performance of assigned duties and
responsibilities which may include the following:
- frequent climbing, balancing, reaching, sitting, standing, walking, stooping, kneeling, crouching, talking, seeing, hearing and manual dexterity
- lifting various heavy materials
- performing various weather conditions
- operating assigned equipment.
- electrical hazards, shock, vibration, fumes and airborne particles
- confined or high workplaces
- hazards associated with working in and near traffic.
EXPERIENCE AND TRAINING GUIDELINES: Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way would be:
Experience:
One (1) year of increasingly responsible signs or traffic signal installation experience.
Training:
Must have completed the twelfth grade and possess a high school diploma or have a GED.
License or Certificate:
Possession of Class A or B CDL preferred.
Possession of, or ability to obtain, a Work Zone Safety Certification administered by the National Safety Council.
Possession of, or ability to obtain, an IMSA Level I Certification.
Sign & Signal Technician - Posting #26-080.
CITY OF PORT ARTHUR
Attn: Hiring Manager
P.O. Box 1089
Port Arthur, Texas 77641-1089
(EEO/AA/V/F/RC/H)
The City of Port Arthur is an Equal Employment Opportunity Employer
Attn: Hiring Manager
P.O. Box 1089
Port Arthur, Texas 77641-1089
(EEO/AA/V/F/RC/H)
The City of Port Arthur is an Equal Employment Opportunity Employer
Department: Electrical
This is a non-management position
This is a full time position
Requisition Number: #26-080
Location & Eligibility
Where is the job
—
Location terms not specified
Listing Details
- First seen
- August 31, 2026
- Last seen
- September 2, 2026
Posting Health
- Days active
- 0
- Repost count
- 0
- Trust Level
- 51%
- Scored at
- August 31, 2026
Signal breakdown
freshnesssource trustcontent trustemployer trust
3 other jobs at pt
View all →Explore open roles at pt.
Similar Technician jobs
View all →Browse Similar Jobs
Newsletter
Stay ahead of the market
Get the latest job openings, salary trends, and hiring insights delivered to your inbox every week.
A
B
C
D
No spam. Unsubscribe at any time.